Dish Pro Plus Lnb Installation
Hey guys, I have a Dish Pro quad LNBF feeding two 625 dual receiver DVRs and the setup has served me well for about 7 years. There are 4 cables running from the quad LNBF: 2 to each DVR. I need to upgrade the RG6 running to one of the DVRs the stuff in place now is probably close to 20 years old and is quality - it's original cable from my old C and Ku band dish system.
Connect a coaxial connection from the LNBF output (Port 1, Port 2, or Port 3) to the DISH Pro Plus Triplexer or DISH Pro Plus Separator Input. You must use a DISH Pro Plus Triplexer or DISH Pro Plus Separator to achieve a single-coaxial connection installation with a dual-tuner receiver. Page 5 DISH Pro & DISH Pro Plus Installation Considerations LNBFs AND SWITCHES. DISH Pro LNBFs work with DISH Pro Plus switches. The DISH Pro Plus Twin functions the same as a DISH Pro Twin LNBF when connected to any DISH Pro Plus switch.
Dish Pro Plus Lnb Installation
My reception is getting dicey Im probably lucky it works at all. This seems like a good time to convert from dual wire to single wire to the DVRs.
Dish Pro Plus Twin Lnb Installation Guide
Dp Plus Lnb Setup
Im a little confused on how to do this. The DVR end of the cabling is pretty straightforward: run the cable into a separator and attach the separator to the 2 receiver inputs of the DVR. Its the LNBF end Im confused about. How do I make that connection? Do I need to upgrade to a Dish Pro Plus quad LNBF? Or can/should I use my existing LNBF with a switch? Thanks, Steve.